Author Topic: Transverse 1.8T Cylinder Orientation  (Read 954 times)

0 Members and 1 Guest are viewing this topic.

Colorado_Baja

  • Heavily Modded
  • ****
  • Posts: 1,672
Transverse 1.8T Cylinder Orientation
« on: March 28, 2005, 08:18:24 PM »
Does it go 1 2 3 4 or 4 1 2 3?

Surprisingly enough this info isnít in my Bentley. I have a reoccurring misfire on the second cylinder, so Iím going to swap the coil packs from 2 to 3 and see where the misfire ends up.

TIA to anyone who educates me on this.

Greg
No time for love, Dr. Jones.

Losers make excuses. Winners make it happen.

"and function, FUNCITON is the key" 
Fugazi

ianacole

  • Heavily Modded
  • ****
  • Posts: 2,622
    • http://www.rmsolo.org
Re: Transverse 1.8T Cylinder Orientation
« Reply #1 on: March 29, 2005, 05:00:57 PM »
Quote from: "blueGOLFturbo"
Does it go 1 2 3 4 or 4 1 2 3?

Surprisingly enough this info isnít in my Bentley. I have a reoccurring misfire on the second cylinder, so Iím going to swap the coil packs from 2 to 3 and see where the misfire ends up.

TIA to anyone who educates me on this.

Greg


It starts with #1 nearest the passenger side wheel well.  I ran into the same problem, even with the "replaced under warranty" coils.  Good luck.  If you need some help, hit me up.

Ian
"The corruption of man is followed by corruption of language." -Emerson

Think you're fast? http://www.rmsolo.org

For the road racer in all of us: http://www.nasarockymountain.com

Rocky Mountain Club B5

Re: Transverse 1.8T Cylinder Orientation
« Reply #1 on: March 29, 2005, 05:00:57 PM »