Author Topic: Wheel shops  (Read 1553 times)

0 Members and 1 Guest are viewing this topic.

Wyaka

  • Lightly Modded
  • **
  • Posts: 159
Wheel shops
« on: June 28, 2005, 12:32:17 AM »
Does anyone know of a good wheel shop that can drill wheel bolt holes to a larger size and not cost an arm and a leg? I got ahold of a set of 4 2002 Mercedes C230 Kompressor 16 inch wheels and the bolt holes are too small for the stock VW bolts. The wheels are immaculate, offset is 37, bolt pattern is 5 X 112, no curb rash and the tires have only 1000 miles on them, which leads me back to my original problem...bolt holes are too small. Any reccomendations would be helpful.
Look officer, I really do own it......

ianacole

  • Heavily Modded
  • ****
  • Posts: 2,622
    • http://www.rmsolo.org
Wheel shops
« Reply #1 on: June 28, 2005, 01:19:33 AM »
If worse comes to worst, don't they make offset studs?  14mm for the hub and 12mm (or whatever fits the rim) on the rim side?
"The corruption of man is followed by corruption of language." -Emerson

Think you're fast? http://www.rmsolo.org

For the road racer in all of us: http://www.nasarockymountain.com

Rocky Mountain Club B5

Wheel shops
« Reply #1 on: June 28, 2005, 01:19:33 AM »

TurboDub

  • Modded
  • ***
  • Posts: 725
Wheel shops
« Reply #2 on: June 28, 2005, 02:22:15 AM »
I'm not sure, but I think this place advertises as a "full service" shop

Performance Wheel & Tire
4095 S. Santa Fe Dr, Sheridan, CO 80110
Phone: 303-934-2929 - Fax: 303-761-4957
info@performancewheel.com

http://www.performancewheel.com/index.cfm
09 DSG GTI
05 Subaru Legacy GT

jayryan

  • Supercar
  • *****
  • Posts: 6,211
    • JayFriesen.com
Wheel shops
« Reply #3 on: June 28, 2005, 10:06:20 AM »
Woody's Wheels just off of Santa Fe should have no problem hooking you up with that.
'03 A4 1.8TQM
'68 MG C
'06 4Runner