Author Topic: Engine work in Denver?  (Read 1860 times)

0 Members and 1 Guest are viewing this topic.

G-Money

  • Stock
  • *
  • Posts: 80
Engine work in Denver?
« on: February 20, 2006, 05:45:58 AM »
Does anyone know of a shop that works on VW's. I am possibly looking at doing some engine internals, like a complete rebuild. I want to do new cams, new crank, new rods, new head, new pistons, just everything. I have a MKIII golf VR6 Turbo. I am looking at building it up so as I can run more boost than 6 lbs. I have read a lot that they are running 10 lbs. on stock internals, daily driven. I want more than that though so I want to build the motor to be bullet proof. Please help, cause EIP is all the way in MD. Dont really want to drive the car there or send the motor there. Thanks

ianacole

  • Heavily Modded
  • ****
  • Posts: 2,622
    • http://www.rmsolo.org
Re: Engine work in Denver?
« Reply #1 on: February 20, 2006, 11:57:11 AM »
If Randy can't help you, I'd look up Joel at RS Motorsports.
"The corruption of man is followed by corruption of language." -Emerson

Think you're fast? http://www.rmsolo.org

For the road racer in all of us: http://www.nasarockymountain.com

Rocky Mountain Club B5

Re: Engine work in Denver?
« Reply #1 on: February 20, 2006, 11:57:11 AM »

jayryan

  • Supercar
  • *****
  • Posts: 6,211
    • JayFriesen.com
Re: Engine work in Denver?
« Reply #2 on: February 20, 2006, 01:25:43 PM »
^ What he said...if Randy can't do it for you- which he can, then contact Joel.^
'03 A4 1.8TQM
'68 MG C
'06 4Runner

G-Money

  • Stock
  • *
  • Posts: 80
Re: Engine work in Denver?
« Reply #3 on: February 23, 2006, 05:44:02 AM »
Thanks for the advice, but who does Randy post under? Just wondering so that I can contact him.
Thanks
Greg

Spicoli

  • Heavily Modded
  • ****
  • Posts: 2,243
    • http://www.jackham.net
Re: Engine work in Denver?
« Reply #4 on: February 23, 2006, 05:50:54 AM »
Life's too short to be taken seriously

Spicoli

  • Heavily Modded
  • ****
  • Posts: 2,243
    • http://www.jackham.net
Re: Engine work in Denver?
« Reply #5 on: February 23, 2006, 05:52:13 AM »
Life's too short to be taken seriously