Author Topic: Appropriate place to attach a boost gauge  (Read 2145 times)

0 Members and 1 Guest are viewing this topic.

zmaninco

  • Lightly Modded
  • **
  • Posts: 101
Appropriate place to attach a boost gauge
« on: May 13, 2006, 12:04:19 PM »
Hi folks,

I wanted to check boost on our 98 1.8T.  Where in the engine compartment is the appropriate place to attach the hose for a boost gauge?

From research, it sounds like you cannot test boost on the 98 with a VAG-COM, is that true?  If its not true, where in VAG-COM is it tested?

Thanx!

Z

kraut-sled

  • Heavily Modded
  • ****
  • Posts: 2,020
    • Autobahn Premier Service
Re: Appropriate place to attach a boost gauge
« Reply #1 on: May 13, 2006, 07:55:50 PM »
VAG-COM will not read boost on a 98 drive by cable car :x

Best place to have a boost gauge line is between the fuel pressure regulator and the intake manifold.  It is easy to reach and gives good readings

HTH
Autobahn Premier Service
2105 South Kalamath Street
Denver CO 80223
303-935-9065

Rocky Mountain Club B5

Re: Appropriate place to attach a boost gauge
« Reply #1 on: May 13, 2006, 07:55:50 PM »

jayryan

  • Supercar
  • *****
  • Posts: 6,211
    • JayFriesen.com
Re: Appropriate place to attach a boost gauge
« Reply #2 on: May 14, 2006, 01:52:01 PM »
I've got an dual a-pillar guage pod I'll sell you on the cheap I had in my '99
'03 A4 1.8TQM
'68 MG C
'06 4Runner

zmaninco

  • Lightly Modded
  • **
  • Posts: 101
Re: Appropriate place to attach a boost gauge
« Reply #3 on: May 14, 2006, 03:15:08 PM »
Quote from: "kraut-sled";p="46604"
VAG-COM will not read boost on a 98 drive by cable car :x

Best place to have a boost gauge line is between the fuel pressure regulator and the intake manifold.  It is easy to reach and gives good readings

HTH

How does a boost gauge correlate to a vacuum/pressure gauge?  I have a vacuum/pressure gauge and am wondering if I can use that to determine boost.  Possible or not?

Z

ianacole

  • Heavily Modded
  • ****
  • Posts: 2,622
    • http://www.rmsolo.org
Re: Appropriate place to attach a boost gauge
« Reply #4 on: May 14, 2006, 03:44:03 PM »
There are two types of boost gauges, one that shows just boost [pressure], and one that shows both pressure and vacuum.  So yes, your vacuum/pressure gauge is will show you boost.
"The corruption of man is followed by corruption of language." -Emerson

Think you're fast? http://www.rmsolo.org

For the road racer in all of us: http://www.nasarockymountain.com

ColoradoB5

  • Global Moderator
  • Supercar
  • *****
  • Posts: 3,311
Re: Appropriate place to attach a boost gauge
« Reply #5 on: May 14, 2006, 10:59:28 PM »
Quote from: "kraut-sled";p="46604"
VAG-COM will not read boost on a 98 drive by cable car :x

Best place to have a boost gauge line is between the fuel pressure regulator and the intake manifold.  It is easy to reach and gives good readings

HTH


Ditto, that is where I have mine as well.  Put it in the wrong place and it just won't read, so you will know right off the bat if you have it right.

Maybe I have been watching too much "That 70's Show" but the title reminds me of something Red Foreman would like to answer...
You can't rehabilitate a fire ant.

zmaninco

  • Lightly Modded
  • **
  • Posts: 101
Re: Appropriate place to attach a boost gauge
« Reply #6 on: May 15, 2006, 11:11:11 PM »
Quote from: "jayryan";p="46612"
I've got an dual a-pillar guage pod I'll sell you on the cheap I had in my '99


Talk to me Goose, how much?

jayryan

  • Supercar
  • *****
  • Posts: 6,211
    • JayFriesen.com
Re: Appropriate place to attach a boost gauge
« Reply #7 on: May 15, 2006, 11:23:16 PM »
How about a case of 1554 :?: :P :beer: or a six :lol: or $50. I don't care :lol:
Going on the drive on Saturday? I'll bring it.
'03 A4 1.8TQM
'68 MG C
'06 4Runner

Eric18T

  • Heavily Modded
  • ****
  • Posts: 1,668
Re: Appropriate place to attach a boost gauge
« Reply #8 on: May 16, 2006, 01:05:47 AM »
Quote from: "kraut-sled";p="46604"
Best place to have a boost gauge line is between the fuel pressure regulator and the intake manifold.  


That is where mine is going to be connected once my boost gauge comes in. My last Omori gauge in the jetta we hooked up there too. Works perfect and is wasy to access for installation.

zmaninco

  • Lightly Modded
  • **
  • Posts: 101
Re: Appropriate place to attach a boost gauge
« Reply #9 on: May 16, 2006, 02:18:47 AM »
I have a plain vacuum/pressure gauge.  Can this be used to measure boost?  It seems like there is a direct correlation between vaccum reduction and boost.  Is it a pound for pound correlation (i.e., one less pound of vacuum means one more pound of boost)?

Z

ianacole

  • Heavily Modded
  • ****
  • Posts: 2,622
    • http://www.rmsolo.org
Re: Appropriate place to attach a boost gauge
« Reply #10 on: May 16, 2006, 02:21:45 AM »
Quote from: "ianacole";p="46615"
There are two types of boost gauges, one that shows just boost [pressure], and one that shows both pressure and vacuum.  So yes, your vacuum/pressure gauge is will show you boost.
"The corruption of man is followed by corruption of language." -Emerson

Think you're fast? http://www.rmsolo.org

For the road racer in all of us: http://www.nasarockymountain.com