Author Topic: Milltek anyone?  (Read 3048 times)

0 Members and 1 Guest are viewing this topic.

KevB

  • Lightly Modded
  • **
  • Posts: 311
Milltek anyone?
« on: June 14, 2006, 01:57:52 AM »
Does anyone here have a Miltek exhaust on a 1.8T?  Preferably on a Golf of Jetta.  I'm looking at different exhaust options and Miltek seems fit what I'm looking for.

Thanks,

Kev
evB
2003 Gti 1.8T

03Indigo

  • Global Moderator
  • Supercar
  • *****
  • Posts: 5,686
Re: Milltek anyone?
« Reply #1 on: June 14, 2006, 10:10:40 AM »
Pat has a Milltek on his  A4, I also have one on my MINI Cooper.  I don't want to totally speak for Pat, but I personally am VERY happy with my exhaust and the note that comes from it.  Pat's car sounds GREAT, so I can only assume that it will sound  pretty similar on the Golf.

Rocky Mountain Club B5

Re: Milltek anyone?
« Reply #1 on: June 14, 2006, 10:10:40 AM »

ianacole

  • Heavily Modded
  • ****
  • Posts: 2,622
    • http://www.rmsolo.org
Re: Milltek anyone?
« Reply #2 on: June 14, 2006, 11:09:21 AM »
"The corruption of man is followed by corruption of language." -Emerson

Think you're fast? http://www.rmsolo.org

For the road racer in all of us: http://www.nasarockymountain.com

a420joker

  • n00balicious
  • Posts: 17
Re: Milltek anyone?
« Reply #3 on: June 14, 2006, 12:46:33 PM »
I have the hi flow cat and exhaust on my B5.5 1.8t and I love it, was having some low end power lack brought it into the dealer cat was bad so instead of letting them replace it with a stock one I splurged for the Milltek, did the exhaust at the same time, Lag is gone car sounds awsome has alot more low end over all im lovin it...only set back 1900 worth of parts + install

sounds awsome=no rice burnin',2stroke soundn, jap yappn import....INSTEAD a nice low growl almost stock but a little louder perfect
ith age comes wisdom. Weather or not you decide to use it is up to you.

coveredbytheblood

  • Heavily Modded
  • ****
  • Posts: 1,081
Re: Milltek anyone?
« Reply #4 on: June 14, 2006, 01:09:42 PM »
I have got the Milltek on my Golf 1.8t.  Next time I would not spend so much on my exhaust, but live and learn.  I do like it, sounds good and it is low key.  My cat is sending a CEL, which they say has been fixed in the newer cats, I just have not sent it back to find out yet.  I have also heard however that a lot of aftermarket cats throw the CEL, but I know a lot of exhausts have not.  If you would like a closeup sound review, let me know, happy to let you hear it.
Coveredbytheblood, JC's blood

34k

  • Heavily Modded
  • ****
  • Posts: 1,251
    • http://www.tw34k.com
Re: Milltek anyone?
« Reply #5 on: June 14, 2006, 01:16:18 PM »
Andrew (coveredbytheblood) has a Mintek turbo-back on his 1.8T Golf. He'll probably chime in on this.

Personally, that's the system that I had planned on getting for my GTI. If GHL hadn't been running a deal on the GHL turbo-back that I couldn't turn down, that's what I'd be running as well.

That said, I have no regrets about my GHL system at all. It cost a few hundred less durring that sale and has performed and sounds great, imo.
Andrew

Truth has no place in a culture of advertising.
2003 GTI
1992 GTI

92UrS4

  • Administrator
  • Supercar
  • *****
  • Posts: 5,934
    • Rocky Mountain Club B5
Re: Milltek anyone?
« Reply #6 on: June 14, 2006, 01:50:04 PM »
haha, he replies just before you Andrew.

Spicoli

  • Heavily Modded
  • ****
  • Posts: 2,243
    • http://www.jackham.net
Re: Milltek anyone?
« Reply #7 on: June 14, 2006, 07:04:13 PM »
I had milltek and the sound was great.  But from what I have read, for performance GHL>Milltek>APR.  From what I have ready and see, GHL and Milltek are pretty close to eachother.  Plus Milltek has the best looking exhaust tips IMO
Life's too short to be taken seriously

Gutz

  • Stock
  • *
  • Posts: 72
Re: Milltek anyone?
« Reply #8 on: June 14, 2006, 09:43:10 PM »
I have the milltek catback on my a4 2.8 i love it!
It is a deep growl but when im calm you cant tell that well i haveit
thats why i like it so much. at crusing like 4k it just kinda rumbles.

KevB

  • Lightly Modded
  • **
  • Posts: 311
Re: Milltek anyone?
« Reply #9 on: June 14, 2006, 11:51:47 PM »
Thanks for all the feedback.  IMO all the exhausts make about the same power (assuming they are the same diameter) so I am more concerned with sound and looks.  I think the Milltek is the best looking and just $499 for the SS cat back isn't bad.

I'm assuming all those that have replied have a turbo-back, not just a cat-back.

Has anyone else had trouble with CEL's?

Thanks,

Kev
evB
2003 Gti 1.8T

ianacole

  • Heavily Modded
  • ****
  • Posts: 2,622
    • http://www.rmsolo.org
Re: Milltek anyone?
« Reply #10 on: June 15, 2006, 12:59:48 AM »
I had a CEL...I installed an extender in the secondary 02 bung and haven't had an issue since.
"The corruption of man is followed by corruption of language." -Emerson

Think you're fast? http://www.rmsolo.org

For the road racer in all of us: http://www.nasarockymountain.com

KevB

  • Lightly Modded
  • **
  • Posts: 311
Re: Milltek anyone?
« Reply #11 on: June 15, 2006, 01:47:55 AM »
The CEL's come from the O2 sensors on the downpipe, right?  

If that's the case I'm guessing I just need to find a downpipe that doesn't have CEL issues.  On that note I was looking at the GHL as it's the cheapest with a high-flow cat.

Kev
evB
2003 Gti 1.8T

ianacole

  • Heavily Modded
  • ****
  • Posts: 2,622
    • http://www.rmsolo.org
Re: Milltek anyone?
« Reply #12 on: June 15, 2006, 02:25:34 AM »
The potential for a CEL exists with any high-flow CAT, unless the extension bung is built in, and/or depending on how the CAT is built and what material is used for the "cleaning."
"The corruption of man is followed by corruption of language." -Emerson

Think you're fast? http://www.rmsolo.org

For the road racer in all of us: http://www.nasarockymountain.com

Spicoli

  • Heavily Modded
  • ****
  • Posts: 2,243
    • http://www.jackham.net
Re: Milltek anyone?
« Reply #13 on: June 15, 2006, 02:36:02 AM »
Milltek is known for having a CEL.. it is no big deal, but annoying.  If you do as Ian described above, then no worries.

If I was going to do my GTI again, I would do Milltek.  While I loved the sound of hte APR, the milltek looked better and was a lot quieter.
Life's too short to be taken seriously

34k

  • Heavily Modded
  • ****
  • Posts: 1,251
    • http://www.tw34k.com
Re: Milltek anyone?
« Reply #14 on: June 15, 2006, 03:04:57 PM »
Quote from: "KevB";p="48035"
If that's the case I'm guessing I just need to find a downpipe that doesn't have CEL issues.  On that note I was looking at the GHL as it's the cheapest with a high-flow cat.


On that note, I've never had a problem with CELs related to my GHL downpipe.
Andrew

Truth has no place in a culture of advertising.
2003 GTI
1992 GTI