Rocky Mountain Club B5

Discussion Forums => Maintenance => Topic started by: Colorado_Baja on August 16, 2004, 09:44:32 AM

Title: Tools For All
Post by: Colorado_Baja on August 16, 2004, 09:44:32 AM
I have a spindel spreader tool that will work on any car that has spindel's... and a Bently Shop book for all MKIV models and engines.


If you have specialty tools that you wouldent mind loaning out post here so every one will know whats available.


Greg :D
Title: Tools For All
Post by: 03Indigo on August 16, 2004, 10:04:04 AM
spring compressors
Title: Tools For All
Post by: kraut-sled on August 16, 2004, 03:51:49 PM
Right and left hand...

I am always up for helping.
Title: Tools For All
Post by: Colorado_Baja on August 16, 2004, 07:19:45 PM
Quote from: "kraut-sled"
Right and left hand...

I am always up for helping.


I have a huge wrench list for the next 3 days (im off wooo hooo) Installing the cup kit, changeing the fuel filter, pulling the fuel injectors for inspection and cleaning, oil change, and hopefully installing the samco boost hoses that I orderd, if they come in soon.

Come on down Randy, you know you want to skip work to wrench. :twisted: :thumbsup:  :D
Title: Tools For All
Post by: kraut-sled on August 17, 2004, 07:29:51 AM
I would love to, but I am skipping Friday for the track and that is all the time I can take this week.

Believe me, I would rather wrench, but I have to pay the bills...
Title: Tools For All
Post by: UberGrrl on August 23, 2004, 07:45:16 AM
Rear brake compressor tool. Works on all Audi, VW, Subaru and I think BMW. Probably Porsche too.
Title: Tools For All
Post by: 92UrS4 on August 23, 2004, 08:35:21 AM
I'ma gonna mova thisa threada toda Maintenancea foruma
Title: Tools For All
Post by: Scuba2001 on August 23, 2004, 11:39:10 AM
I have the 16mm 12point allen to change the tranny fluid on manual cars.  I also have the 17mm 6point hex allen for the fill plug.  Both ate 1/2" drive socket/allens.
Title: Tools For All
Post by: SweetVW on August 23, 2004, 12:16:04 PM
Quote from: "Scuba2001"
I have the 16mm 12point allen to change the tranny fluid on manual cars.  I also have the 17mm 6point hex allen for the fill plug.  Both ate 1/2" drive socket/allens.


Going off of Steve's thread, I also have a 6-8-10-12mm 12 point star bit that fits the 1/2" wrench socket.  It was of great value when I replaced my drivers side door lock assembly.
Title: Tools For All
Post by: 92UrS4 on August 23, 2004, 12:18:10 PM
Brake Bleeder
Title: Tools For All
Post by: velo on August 23, 2004, 04:06:04 PM
Oil extractor and 12 point star bits like Dave has (a must for removing door lock assembly).
Title: Re: Tools For All
Post by: Gallep on July 26, 2007, 03:00:19 PM
I've got ETKA for VW and Audi
VAG-COM
Bentley for the B6 A4/S4
Timing Belt wrench for adjusting the tensioner
Title: Re: Tools For All
Post by: jfrahm on August 26, 2007, 05:25:07 PM
vag-com
huge socket set (3/4" metric up to 50mm)
engine crane
skeet thrower
keg tap
Title: Re: Tools For All
Post by: redline on August 26, 2007, 09:45:51 PM
big bad Nikon :) Anyone ever needs photos of their car, I'm your man.
Title: Re: Tools For All
Post by: Docwyte on August 26, 2007, 09:48:58 PM
VAG-COM
Oil Extractor
Brake Bleeder
Rear caliper tool
Several different "special" front strut tools
Beer Fridge
Title: Re: Tools For All
Post by: scott on October 27, 2007, 09:18:40 AM
12 point star bits like Dave has (a must for removing door lock assembly).

those are more commonly referred to as "triple squares" and they are good for inner axle bolts to!